Questions & Answers for: back rotors

Question about 2005 Caravan

2 Answers

Back Rotors Why is it so hard to remove the back rotors off a 2005 dodge caravan do you have the parking brake applied if not you might have to back the ad juster off in order to get rotor off unless ...

Ad

...rotors on the rear wheels. I have the calipers off and I used two bolts to back the rotor off off the axle, however, it seems that the emergency brake pads are keeping the rotor from coming off. The ...

Ad

rotors must have the parking brake OFF before you take the rotor off!! those springs are for the parking brake. if you mess with the rotor while still in park, you can knock a spring loose and make it

Question about 2004 Windstar

2 Answers

...rotors back to the shop and getting your money back. I would then buy a good set of your own from AutoZone or someplace and that way you can make sure you are getting the correct rotors. Brakes are ...

back rotors have been replaced. it stopped for about a day no continues to **** It's possibly...... .....1st, out of parallel rotors.......They may need replacing ....not just resurfacing. .......2nd,

...back rotors to see what they are. (If bearings are in the rear rotors, buy Bendix rotors for the rear. They come w/ the bearing carriers already in the rotor so you do not have to press them in. Buy ...

Question about 1992 Explorer

1 Answer

rotors tap rotor with a hammer or light sledge hammer from the back turning the rotor each whack. If you are trying to save the rotor use a piece of wood against rotor while you pound. Do not go crazy

Can't get brake system back on the rotor, Can't get brake system back on the rotor, Place a screwdriver or small prybar between the brake pads and pry them apart until the caliper with fit

Question about 1992 Explorer

1 Answer

...assembl?? Take the brake caliper bolt and try tightening it against the rotor and then back it off.  Turn the rotor, tighten, then back it off and repeat this until the rotor pops ...

Question about 2010 Genesis Coupe

0 Answer

replace brakes replaced rotors w vented slotted rotors new rotors are rubbing on backing plate against inner lip of rotor, rotor depth is set by hub, disassembled reassembled, torqued 3 times no ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...