Questions & Answers for: back window winder

window winder Manual winders are all the same (in my experience)... so this should apply to you: You need to push back on the door-skin so that you can access a small bronze/silver clip that holds the

...window mount also. if you can locate the place where the end of the cable is supposed to mount (on a little slider thing) and make a new mount for the end of the cable, then take apart the winder ...

...winder handle. there is a clip on the back side of the window winder handle it is in the shape of a c you need to take a pair of neddle nose plires and pull the clip out and the handle will come ...

...window winder.Can you advise how to remove the winder clip? Regards Dave Get a coat hanger and make a small hook to remove clip the jesus clip. When it comes out you will say "Jesus where did it go". ...

...back inside door panel It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel (if ...

...back door panel on 03 expedition It's usually the window winder that presents the problem . Remove all visable retaining screws ie; Grab handle , Internal door opening lever , Button on top of panel ...

...window winder back on push the clip back on slightly but not all the way then push handle on slowly when it is all the way on give it a sharp bang so that the clip will lock back in place. Hope this ...

...window back up with my hands. These models are prone to corrosion of the winder cable mechanism due to water ingress from the window rubber seals being poor so, the money is on a broken winder cable. ...

window winder take off remove cap and screw from centre of wondow winder, you will need a small screw driver as there will be a cir clip on the back of the winder you need to get this off to remove it

My back window won't roll down and wen I put the right fuse in the spot the motor keeps running your window glass motor is perfect. but your winder is faulty one. replace the winder.