Questions & Answers for: backlight monitor

...monitor online, but upon arrival it has an uneven backlight or backlight bleed. Namely, moving an image from top to bottom of the monitor increases its brightness by about 15-20%, and the "blue" ...

...a flashlight very close and shine it on the screen . If you can see the normal display the monitor is OK but the backlight or the inverter which provides proper voltage to the backlight has gone

...backlight Monitor has two backlights as do most monitors. I think this might be a circuit board problem. While it's certainly possible for both backlights to be bad, what's the chance of them both ...

monitor. They indicate the Backlight Lamps fit several models. To be SURE, check the part number of your Backlight Lamp, and see if it matches. http://www.lcdrepair.us/ccfl-lamps.html In case you need

...Monitor No backlight. Is it easy to change the bulb? Where can I get a bulb? No, it is not easy to change the backlight on an LCD panel. The backlight is an integrated part of the LCD panel itself. ...

...backlight inverter in your lcd monitor is about to give up...The backlight inverter is a cold cathode light thats responsible for the image in your screen.. if the lights located on the upper and ...

...monitor have not backlight. what's problem and how i can repair it? Thanks. Usually Dell monitors have a 3 year warranty, hence check with Dell. If your monitor is out of warranty this problem can be ...

...MONITOR BUT THERE IS SHADOWS CAN BE SEEN. THE POWER IS FUNCTIONING ALSO THE CPU. LCD monitors have backlight (NEON / LED backlight), the screen will go dark if the backlight circuit / electronics or ...

backlight Monitor comes on for 2 seconds and goes black but still has picture but no backlight There are two reasons, the inverter transformer, "usually more than one" is the most likely to break down

...backlight of the monitor is blinking continuously - it never goes black. It blinks almost like a failed neon light. Problem is NOT "flickering" with stripes or "bleeding" from the sides. I have reset ...