Questions & Answers for: bad axle

AND AXLE I HEAR NOISE FROM IN BETWEEN WHEELS AND AXLE ,WOULD THIS BE THE WHEEL BEARINS GONE BAD Bearings may be bad or where the bearings ride on the axle may be scored. Jeeps are known for soft axles

...in the cv boot just on the back sides of the brakes where the axle goes into the spindle if it needs axles Front C.V 1/2 shaft bad, if turning to right, right one bad, turning to left, left one

...axle going bad,,or bad. you'll need to replace the axle it's coming from. just have someone listen to the noise while you're going forward or backwards while turning the wheel in motion to determine ...

...axle is bad, do the same to your left and if noise exists then your rigth axle is bad.good luck sounds like a bad cv joint or same thing [axle] find out where the sounds at[which side] drivers or ...

...the hubs, or outer axle knuckle area. I thought the new axles maybe bad so did it twice, still same noise. COuld it be I need to change the differential and ****** fluid? CHECK CLIPS ON BRAKE

...is bad, the angle of the CV axle changes. Most common on the side if rhe short axle. Forget the tire and brake exam for this problem. ***** wobble is only solid axle trucks, not Chev pass

...bad front axle shafts a known issue with Mazdas? not anymore than any other front wheel drive car. are you having a noise(clicking or clunking) coming from the front only when turning. if so then you ...

...Low oil level in the axle, bad or contaminated oil in the axle, or a bad bearing in the axle. It is also possible that you have a brake issue on one side (easy to spot if you inspect the rear

...bad cvc axle how can i tell if cvc axle is bad cv axles have a distinct click when turning corners at slow speed when they are on the way out if bad they will produce a harmonic vibration or a ...

...bad? Also I heard you can drive some 4wd without cv axle is that possible? It can damage the parts that keep the tires on our car if you don't get the CV axles replaced. You should take your car to a ...