Question about Nexxt Premium WFMC6400UC Front Load Washer
...balance to spin out the water. But my issue is, how come I can change the setting to the Spin only cycle and the washing machine spins out all of the water immediately without trying to get the ...
...spin with more items added most modern machines have an out of balance detector to prevent the machine being damaged with a badly balanced load. with a single item in drum, load will not balance and ...
Question about ATF6000ES Front Load Washer
...balance but does not do it earlier in spin cycle Some front loaders have a super high speed at the end of the spin. Front loaders don't like small loads, the laundry does not spread out evenly enough ...
...balance durning the spin cycle, stopped the washer and redistributed the load. Now the washer will not spin or agitate. Get the model number. It may have an off balance switch that is stuck. Try ...
...spin off balance. To get the washer to spin fast like it should I had to open the lid then close it, re-engaging the spin cycle. I opened the top and watched the motor engage in the spin cycle. with ...
balance-spin-cycle-18991.html http://fixitnow.com/sbrvrs/washers.htm http://www.repairclinic.com/Washing-Machine-Troubleshooting This model of washer does not have an out of balance cut off switch. If
Question about Atlantis MAV9750A Top Load Washer
...spin cycle , balance could be one of the the balancing mechanism failed and not running could be the balance sensor shutting down the spin cycle. You should start by checking the balance shocks
...spin. Balance load feature tries six or seven times but then quits. Load is not out of balance and by starting cycle over or unplugging machine "Sometimes" will spin. No change in load, ...
Question about Atlantis MAV9750A Top Load Washer
...cannot balance that item. So with a front loader it wont spin at high speed because it would be off balance and either damage the machine or the machine would "walk" because of the off balance
Spin cycle is going on balance Betty, if you suggesting the machine is out of balance/ causing the machine to jump around in spin cycle 1. it may be due to a heavy wet load ,like towels unbalancing ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions