Question about CLX485 Cordless Phone
...base shows "Uniden" which also keeps on flashing every 2 seconds. None of the buttons work. Tried putting in battery in the base compartment, but the same result. If I keep the handphone in base ...
...power. 4.charge light on main base should be flashing. 5.while the light is flashing press & hold the hash # button on the additional hand set only until it says registration complete & its all
...flashing stops, re-register the handsets to the base. Re-Register a Handset to the Base 1. Remove Handset Battery. 2. Reconnect battery while holding down "*" and "#" key. 3. Then press the right ...
...and no working hello there i think this is because you need to register the second handset with the base here are the instructions REGISTRATION Registration links the base to a cordless handset. Once ...
Question about Cordless Phone
My handset displays "New Voice Mail" and the base displays 00. Handset displays "New Voice Mail" and the VMWI flashes continuously and the Base shows 00 and says "You have no messages". How do I ...
...The flash shoe was broken. Other than that the flash works fine. This part is just the plastic base that attaches to the flash holder on the camera. Please help me!! yes it can replace the ...
Question about Gigaset 8825 Cordless Phone
...flashing base at us and doesn't work. we've tried to register it to the base according to instructions.. it flashes registering but then stops and doesn't register.. it keeps flashing base. what is ...
Question about Speedlite Di622 TTL Flash for Canon
i have a Di622 Nissin Flash, the base is broken. I have a Di622 Nissin Flash, the base is broken. The part that slides into the hot-shoe. Would like a quote on the fix. i have a Di622 Nissin Flash, ...
Question about Speedlite Di622 TTL Flash for Canon
...base for about 10 seconds (until the IN USE light starts to flash), then release the /HANDSET LOCATOR button. Immediately press /HANDSET LOCATOR while the IN USE light is still flashing. (The light ...
Question about Speedlite Di622 TTL Flash for Canon
...base keeps flashing 88 .renewed battery but unit is still flashing 88. My unidentifiable 9480 base keeps flashing 88 after replacing new battery Either the base is defective and not keeping the ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions