Questions & Answers for: battery charge drill

Ad

Question about Multi-Volt Battery Charger

2 Answers

...charge. The fully charged battery went dead in 1-2 seconds, and now will not hold a charge. Thnaks Tiff If the drill has a short in it, then yes, it could short the battery out. Probably in the ...

Ad

Question about 19.2v 3/8"drill/driver W/ Work Light Bat&chgr

1 Answer

...battery will not charge. there is still some life in the battery as it will run the drill, it just won't take a charge. i suspect that it is below some level of charge and the charger sees it as a ...

Ad

Question about 3/8" Dr. 14.4V Cordless Drill Kit

1 Answer

...charge. Battery is lithium (model 1434)) and charger is a DC1411. Red light on charger comes on when battery is inserted and may stay on for 10 minutes to an hour before switching to green light, ...

Question about 3/8" Dr. 14.4V Cordless Drill Kit

1 Answer

...rechargeable battery's they slow stop holding charge at all, make sure when you get a new rechargeable battery you fully charge it once and fully discharge it once this will increase batterys life ...

Question about Black Max 24v Cordless 1/2 Inch Drill / Driver

2 Answers

charge the battery My new Black Max 24v drill charger will not charge the 24v battery. The charger only puts out 18 volts at open circuit. This will not charge the battery. The drill is new and I have

Question about 18V 1/2"CRDLS Drill Kit

1 Answer

...battery in the charger when you are not using the drill to fully charge them. Try to use the batteries often like in the light or some other means to occasionaly dischage the batteries for the best ...

Question about DV18DVC 18V Cordless Hammer Drill

1 Answer

...drill for 9 months batteries not charging. the light on the charger is on like its charging but changes to say battery full after a couple of mins and batteries aren,t charged.i have 2 batteries same ...

Question about DV18DVC 18V Cordless Hammer Drill

1 Answer

charge if they sit for a long time. Also, when using the drill, never use it until it runs the battery down so far stops, as this can damage batteries or discharge them to where again you need to very

Question about DV18DVC 18V Cordless Hammer Drill

1 Answer

...battery not holding a charge i did the intl. 9 hr charge and only got 2 screws drilled in before drill went dead. charged again for 2 hrs and same thing. the battery is not holding a charge please ...

Question about Black and Decker 18V Cordless Drill & 20 Piece Set

1 Answer

...charge when being stored. Do not short them out to discharge them! Wait until the drill complains that they are flat and then recharge them rather than when they first start to slow down. Do not let ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Drills Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18127 Answers

john h

Level 3 Expert

22486 Answers

Are you a Drills Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...