Questions & Answers for: Nissan bearings

...1/2 hr each side Try google searching "How to replace rear wheel bearing" I suggest USA made wheel bearings from http://mibearings.com/parts/NISSAN.html Those are their nissan wheel bearings their ...

Ad

Question about 2003 Altima

2 Answers

...is one) and turning counter clockwise. you will see the bearing under the rotor. Check for missing bearings , dirty oil debris, etc. If it has any of this , replace with new bearing. The exact way ...

Ad

Question about 1993 King Cab

0 Answer

Driveshaft support bearing question I'm replacing the driveshaft support bearing (some call it the center bearing) on a 1993 Nissan SE-V6 (68K miles). When I torque the nut (148-171 lbs) on the yoke ...

hydrolic clutch makes grinding noise when in nutural... each time i release my clutch in nutural, the clutch makes a grinding noise... is it a lack of fluid or what?? It's the throw out bearing. They ...

Directions replace front wheel bearings on a 1985 nissan stanza? Right front wheel bearings r and r. NOTE: After the wheel bearings have been removed or replaced or the front axle has been reassembled

How do I replace the front wheel bearing on a 1995 How do I replace the front wheel bearings on a 1995 Nissan Pathfinder? I'm seeing parts on websites that list Inner bearings and Outer bearings..what

...just slide in with ease into the crank and not have to be pounded in these are fitted with roller bearings strips of very high tensile steal that tumble in the case, instead of rotate like a ball ...

...out. Pry the inner oil seal out and remove the inner bearing. To install: Clean and inspect the bearings and outer races. Using a brass drift and a hammer, drive out the bearing outer race. Press ...

How do I change a bearing in the right front wheel? Years ago I had a 1970 chevy Nova and I changed the bearing. It was simple. Remove the wheel, remove the cotter pin and remove and replace the ...

Question about 2002 Maxima

1 Answer

cam bearings right head 1994 pathfinder the cam has froze up. distroyed the timing belt at the 6 O'clock position Therefore I believe the cam bearing/s had to have seized up. can I change the bearings

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,587 Questions

2003 Nissan Altima
2003 Nissan Altima

1,450 Questions

2000 Nissan Maxima
2000 Nissan Maxima

1,309 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,122 Questions

2002 Nissan Altima
2002 Nissan Altima

1,306 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...