Questions & Answers for: Dodge Grand Caravan bearings

Question about 2002 Grand Caravan

1 Answer

Alternater Bearing How do I change alternater bearings on a 2002 grand caravan 3.3 Sorry but you'll have to buy a rebuilt from auto supplier, unless you wnat to go through the hassle of trying to get ...

Ad

Question about 1999 Grand Caravan

2 Answers

...engine that cannot produce at least 15psi pressure at idle likely has a pressure loss at the crank bearings (most commonly connecting rod bearings) You can check the clearance by using plasti-gage

Ad

Question about 2007 Grand Caravan SXT Minivan

1 Answer

I have a 2007 grand caravan front wheel drive that needs a new rear bearing hub assembly. I have removed all except the assembly and it will not budge. Is there anything I can use to remove the hub ...

Question about 2007 Grand Caravan SXT Minivan

1 Answer

I need to know how to change the rear wheel bearings on my 1997 Dodge Grand Caravan. Hello pixxi 29: My name is Roger and I will help you. To replace the rear bears would be impossable to do. THis is ...

Question about 2007 Grand Caravan SXT Minivan

1 Answer

changing wheel bearing 1992 dodge caravan WHAT WHEEL BEARING BEING REPLACED.REAR AXLE BEARING. FRONT BEARING RWD OR AWD WITH HALF SHAFT HUB BEARING.REASON I ASKED YOU BECAUSE ALL THREE HAS DIFFERENT ...

Question about 2002 Grand Caravan

1 Answer

Removal and installation of the hub and bearing 2002 dodge caravan This hub bearing is a complete asm, it bolts on and not like some older cars where the bearing and seals are separte and must be ...

Question about 1996 Grand Caravan

1 Answer

...I could put a standard bearing in place of the spun one as long as I didnt see any brass on the bearings. So I replace the bad one (#6) and tested it out, it only made a knocing noise for 5 ...

Question about 1999 Grand Caravan

2 Answers

how do you check wheel bearings? Most cars will go their liftime without a problem from wheel bearings. And they let you know when they go by billowing smoke out of the wheel as you drive, then it is ...

My wife has a Peugot 307 petrol engine. When pulling off from cold, there is a grinding / grating noise. It only occurs when the car is moving and lasts 1 to 2 minutes. Dip the clutch and the noise ...

...hub assembly when trying to pull it I pulled the front half of the hub assembly off and left the bearings in the hole what do I do? Wish I could figure out how to upload a picture but I can still ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...