Questions & Answers for: beat shaft

Ad

Question about 1996 Caravan

2 Answers

shaft, and cannot get the ball joint to come out. any ideas beat them you need to take off the control arm. the ball joint is pressed into it and it does not come off unless you press it out in a vise

Ad

Question about 53542 / 53544 Side by Side Refrigerator

1 Answer

...it is not an easy task ! Please do not try to beat the shaft out, as this will mushroom the shaft and you will never get the fan off, another alternative is to buy a new fan blade, hope that ...

Ad

Question about 2003 Sierra 1500

1 Answer

...and am tring to replace the hanging bearing. However I can not remove the old one. Is there a trick to this? I took a BIG hammer and wedge and beat the hell out of it until it released from the

does'nt work i would heat tghe hook up with a torch and beat on it up,If that does'nt work i would cut the shaft and replace the shaft and hook.I bet if you beat on it (takes time) you will get it off

...saturan vue but i cant get the inner hub off the spline shaft i assume you removed the nut that holds the spline shaft on the hub? try wd40 and put the nut back on a few turns and beat it with a ...

Question about 1995 K1500

1 Answer

...shaft removeal. Have retainers off at axle & shaft seems frozen or rusted in place. Do I beat it out? Ant tricks? I use a pry bar myself I would not beat it with anything more then a rubber ...

...beat the **** out of end of shaft<(definitely ruined for core return) shaft wont budge. Use a piece of scrap 2x4 and place it on the end of the axle shaft and tap it with a hammer or mallett to ...

shaft should just come out of the spindle, after you beat it with a hammer...lol, but seriously, and then the other side you need a special tool it is a 2 prong fork, to pry between the tranny and the

Question about 1994 Ranger Supercab

1 Answer

...way is to remove the drive shaft and take it to a place that can press out the old u joints and install the new ones. dont beat them out it distorts the drive shaft causing problems. hope this ...

...the pin do to this shaft being seized due to some rust . Why they didn't add a grease nipple there beats me . Is it safe to heat this shaft This shaft runs into the gearbox selector, it may be an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...