...press and hold the menu and device/input buttons both in together for 5 seconds then the led will blink a number of blinks pause then blink another number of blinks then repeat that process. Let me ...
Question about WD-52525 52" Rear Projection HDTV
...any lights on the front light up red? If so its in prtective shutdown and you can get a two digit blink code by pressing in the menu and device buttons on the front panel. then counting the number ...
Question about WD-62525 62" Rear Projection HDTV
green status light will not stop blinking. did green status light will not stop blinking. did system reset, still blinks, pauses, blinks sounds like bad lamp hope this helps out
What does it mean when the status light is blinking red on my mitsubishi wd-62526 When the status light is blinking push the device and menu buttons on the tv at the same time and hold for 5 seconds ...
Question about WD-57731 57" Projection HDTV
replaced lamp but lamp light still blinks orange I have a wd-57731 and the picture disappeared bu there was still sound. The lamp light blinked orange. i replaced the lamp turned the tv on and the ...
...13 on mitsubishi wd52628 tv will not power on. no red or yellow status light. Status light green, blinks rapidly, then blinks 1 time followed by 3 blinks. wait for the light to go out then press ...
Question about WD65737 65" DLP TV
tv turned itself off and started blinking red light. i unplugged tv and waited and then plugged back in and waited for the blinking green light to go off. turned tv back on and it worked all day. ...
Question about WD-57733 57" HDTV
Mitsubishi WD-57733 timmer light blinks then lamp light blinks Timer light blinks maybe twice then lamp light blinks serveral times, tv won't power on. Could it just need a bulb replaced? Yes. It is ...
Question about WD-Y657 65" DLP Projection TV Widescreen, 1920x1080, HDTV
mitsubishi dlp wd y65 orange light blinks These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit
Question about WD-Y657 65" DLP Projection TV Widescreen, 1920x1080, HDTV
my tv blinks 6x red and 1x yellow. whats that mean? Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the ...
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions