Questions & Answers for: Chevrolet 1500 blowing 40 amp fuse starter

Question about 1986 K1500

2 Answers

blowing a 40 amp ignition fuse everytime I turn the key over. Suspect short in starter It is a grounding problem.Your motor does not have a good ground from the motor to the frame..Bad starter will ...

Ad

...blowing the 40 amp fuse in BATT2 My 2003 Cavalier keeps blowing the 40 amp fuse in BATT2 terminal everytime i start the vehicle. That then knocks out my ignition, my signal lights and my tail lights. ...

Ad

Question about 1986 K1500

2 Answers

...fuse link in system is not burned out first. Check ignition switch circuit, ensure the ignition switch works, if good then you need to check starter solenoid to make sure it works. If solenoid is not ...

blowing ,i dont understand i have replaced even with with a 40 amp fuse it started i drve it that day no problem , the nexy moring i went to stat it nothing no accesory lights on the dash , the lights

...40 amp ignition fuse to keep blowing on my 1999 Chevy Silverado? Starter was checked and is good. Originally, I could replace the fuse and it would last a few weeks, then it went to daily, then it ...

Question about 1984 K1500

1 Answer

...fuse and what amperage is equal to the wire gauge that is on the original? Fusible links work much differently than blade fuses, they can tolerate a large load without melting, this is why they are ...

blowing 40 amp fuse 1997 tahoe when trying to start The starter could have a sort circuit

...amp fuse in position 8 of the block. Is the click you hear possibly from the starter solenoid? If it is, that means key switch part of circuit to the solenoid is good. Either starter motor is bad, or ...

Question about 1995 K1500

2 Answers

blowing then smelled an electrical smell. what could have burnt? checked fuses and seem ok. could it be the ignition switch? starter relay? Any ideas? thank you If you had a short in the starter motor

fuse. Some of the cars lights still do work. Is it in the starter solenoid? it sound like ignition is faulty, when you turn youre key to turn on ignition on there is a plastic barrel on the end of the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...