...blue and red out of the dimmer and my three way is powered through the light, not the switch. Help! hi you have many way to connect it go to ...
Question about 6124H 24 Hour LCD Programmable Decora Electronic Incandescent / Ind
wright 6 You do need a neutral for a timer switch, that is the white wire coming off the timer. The black wire is for the hot wire coming into the box, and the blue wire is the wire going to the light
Question about 6124H-A 6124H-A Decora LCD Timer Switch , Almond
...to black leviton -- blue leviton to black for light fixture or black "line" on GFI -- all whites connected together. Charlie P.S. If the GFI is only powering a light fixture, it is not
...light up. Next take wire nut off Black-blue connection and test to bare ground >>> tester should NOT light up until push button is activated and countdown begins. 3) Another thing to try is ...
...and then the ground. The black hooks to the hot or common wire. It may be black, but it will be the hot wire. The blue wire hooks to the wire going to the light. The ground hooks to the green or
Question about Rotary Dimmer 6683-i Ivory 3-way Trimatron
...blue wires and one black.. this switch is one of 2 that controls the hall light. my switch i am installing has 1 black 2 red and the green ground. which red goes with which blue wire.. At this point ...
...blue/white = light and vent. Thanks! The switch that you have works like 3 seperate switches. most of these switches will have gold screws on one side and silver screws on the other side, lets say ...
on and off. When lights blink, timer is wired wrong. Error: The white wire is connected with red-or-blue wire instead of connected to neutral. Timer has 4 wires: green for ground, black for hot, white
Question about R01-PR180-1LI Decora 180 Degree PIR Motion Switch Ivory
motion light detection wiring Black wire to constant power Blue wire to load (to your light) Green wire to Ground
Question about R01-PR180-1LI Decora 180 Degree PIR Motion Switch Ivory
...wires from dimmer to switch and what do I do with leftover wires. The dimmer has yellow, black, blue wires. These are hooked to Yellow to black-white, blue to red, black to black. How do they ...
Usually answered in minutes!
55 Questions
32 Questions
32 Questions
23 Questions
19 Questions