Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...cover that snaps over the bobbin i have a kenmore drop in bobbin 16221, and the clear plastic cover that snaps in over the bobbin went missing. what is that piece called so i can order a new one? ...
Question about XR-65t Mechanical Sewing Machine
...bobbin cover. Place the left tab in place then press lightly on the right side until the cover clicks into place. *insert the cover so that the end of the thread comes out from the back of the cover. ...
bobbin case cover near the machine-fed dogs. A side or front loading bobbin needs to be loaded into a removable bobbin case under the machine. 2. Choose the right size bobbin for the sewing machine. 3
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
bobbin cover to go back on bobbin holder is too high to close cover over it try a different bobbin, make sure the bobbin is seated correctly in bobbin case,,take a can of air & use it on
bobbin cover will not close bobbin is too high to close cover if the bobbin cover won't fit easily over the bobbin the either it's the wrong bobbin for the machine, the bobbin is warped or ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
bobbin cover fall off continuously Why does the bobbin cover fall off each time I either move the fabric or if the fabric is thick? It rides up and down. Should it be secured into the lot? yes, it ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bobbin hook cover I removed the bobbin, and then the bobbin case to get out a stuck thread, then inadvertently put the bobbin back in the case without pushing the bobbin hook cover back. Now I can't ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...needle thread will advance and "circle around" the bobbin holder, drawing the bobbin thread up through the cover plate. if you have done it properly, you can replace the cover plate and begin to
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...bobbin cover release button to the right and lift the bobbin cover out of the way. Remove the current bobbin, if needed. Hold the new, full bobbin so that the thread comes off the bobbin ...
...bobbin cover release button, located to the right of the bobbin compartment, to the right and hold it there. The bobbin cover should now pop open. Gently pull it towards you to fully open the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions