...to me too, I reversed the bobbin feeds and it has not tangled since then. I was orignally feeding the bobbin from the left side and now i feed the thread from the right. It works great this
...tangled in the bobbin area. Now the bobbin area is staying clear but there are no stiches being made. I have no idea what to do. At first, my machine was getting all tangled under the fabric and then ...
...tangled in the bobbin area take out the bobbin.. then thares 2 clips/ on the bobbin. open these and release the innner bobbin now remove the 2 innner parts. then useing a small brush clean out the ...
...Bobbin thread keeps getting tangled. I have to take everything apart to pull out all the thread. I am trying to cover piping for a dining room chair reupholstering task. Sounds like the bobbin is ...
...tangled or wrapped around anything. Make sure that the bobbin is unwinding in the correct direction as well, most bobbins, this is clockwise as the bobbin faces you. If you are using inexpensive ...
Question about BC-1000 Computerized Sewing Machine
...is no thread tangled inside the bobbin housing it will cause the timing of the machine to be off and cause issues with your needle picking up the bobbin and thus cause a mess inside you bobbin ...
...tangled while you're spooling the bobbin on the top right corner of the Singer 1507 machine? If this is the case, you have to pull the thread through the top tiny hole in the bobbin, and hold on to ...
...bobbin side is a tangled mess when I stitch. The top looks fine, but the seam falls apart easily and the backside is all tangled. I cleaned underneath the bobbin holder but it didn't help. My ...
...bobbin case to remove the tangled thread. After cleaning the bobbin case, insert the bobbin case properly. If the needle is bent or broken, replace the needle.Then, thread the upper thread ...
Question about CS6000i Computerized Sewing Machine
Baby lock pro BL40, bobbin thread tangles, tried new bobbin, cleaned under plate, needle is straight, what to do? bobbin thread tangles up. Tried new bobbin, cleaned under plate, needle new and ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions