crankshaft pully problem hi.. im meor from malaysia..i just bought a 2nd hand 93 swift 1.3 engine with racing cam.. i have a problem with crankshaft pully.. the 5, 10mm pully screw always come out ...
Question about 2001 Sportage
IS IT CORECT LIKE THIS? The large bolt holds on the lower crankshaft pulley for timing belt, the six small bolts hold the larger pulley that drive the alternator, power steering etc. It sounds correct
...bolt is and holds it to the crankshaft, they may also be a few smaller bolts around the outside of the big bolt, those hold the belt pulley on to the crankshaft. If it thats kind of setup remove the ...
...bolt 1.6 hdi 307 you need to peg the crankshaft near your gearbox. There is a hole in engine block for this purpose. Find this hole and insert an allen key (thick enough to fit in there). Turn the ...
Question about 2003 Santa Fe
...crankshaft pully broke off and car dont work with out it, I need a detailed description on how to remove it. they have the bolts removed but cant get the pulley off. . . do they need to have a cog ...
...holds key is even slightly worn dont trying fitting another pully as the crankshaft has to be replaced first as its the key which dose the driving not the bolt Sorry mate Let me know how you go ...
...bolt 5. Turn crankshaft on turn clockwise. Ensure crankshaft sprocket timing marks aligned 4. Slacken tensioner bolt 5. Slacken tensioner bolt 6. Allow tensioner to operate. Tighten tensioner 6. ...
...crankshaft pully off of a 2000 Oldsmobile intrigue. I was able to remove the center bolt bolt the the pully doesn't have any holes to use a puller with how can I take it off. Attach the arms of ...
...crankshaft pully that drives the belts it is the lowest pully Inside the engine, low in the block, just above the bottom oil pan bolted to the lower engfine block. At the front of the engine, the ...
...bolt snapped need to repair So, go ahead and repair it. You don't need our permission. How could a crankshaft pully bolt snap ? At least four ( 4 ) bolts secure the crankshaft pully to the
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
