...size ratchet i need it's metric. Do you have 2.3L 4 cylinder, 3.0L 6 cyl or 4.0L 6 cyl? Drive Belt Tensioner, Automatic Removal and Installation Remove drive belt (8620) as described in this section. ...
...size:10pt;font-style:;font-weight:;text-decoration:;color:;} Accessory Drive Belt Tensioner Removal & Installation To Remove: Rotate the accessory drive belt tensioner clockwise. Remove the ...
tensioner pulley? how long is the bolt that holds it in a tensioner pully puts tention on your serpintine belt the bolt size verrys from vehicle to vehicle how to put a tensioner pully
...size is the head on that bolt? Lefty Loosey, Righty Tighty. As you look at the bolt from the front of the engine. It should loosen when turned counter clockwise. Curios though, why are you removing ...
...SIZE BOLT TENSIONER USE I USE BOLT SIZE AND TORQUE SPECIFICATION CHART IF BOLT SIZE METRIC 13M TORQUE IS - 39 - 41 FT LBS IF BOLT SIZE IS 15M METRIC TORQUE IS 51 - 55 FT LBS 17M METRIC BOLT TORQUE IS ...
size of motor you have so please pick the appropriate diagram....and please don't forget to rate! Thanks! Vg30i, Ka24e And Vg30e EnginesAlternator belt tension is adjusted on these engines by means of
...if not you need to get a breaker bar or long wrench the size of the bolt in the middle of the tensioner and pus or pull the tensioner till it moves the right way careful its spring loaded and will ...
...size metric socket , and hold back on to the tensioner towards the drivers side of the engine, this releases the tension from the belt, and then let the serpentine belt lay aside, then disconnect the ...
Question about 2008 Yaris Sedan
...PULLEY /WHEN I ONLY NEED THE BOLT did you really expect an answer here with only an engine size listed?? we are not mind readers. please rephrase all your info and ask the question again. good ...
Question about 1996 Trooper
...bolt for a 1996 isuzu trooper and where could I find this bolt? depend on motor size but any hardcast bolt with lockn nut should work... ace hardware or lowes has a isle of harded cast bolts and ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions