Questions & Answers for: Dodge Dakota brake booster installation

Question about Dodge Dakota

1 Answer

...the brake lines going to the back of the truck, but most likely the master cylinder, check to see if you see any brake fluid on the front of the brake booster or any paint peeling off the brake ...

Ad

Question about 2003 Dakota Club Cab

1 Answer

...brake booster shot, or is there something I should be looking at. check 2 things first one is their is a plastic check valve that is inserted into the booster (under your hood) then goes to a vaccum ...

Ad

Question about 1997 Dakota

1 Answer

...brake booster is shot Clamp the brake booster rubber vacuum hose and see if that has any affect if it does the booster needs to be replaced.use a g clamp or similar.if you drive to test be aware that ...

Question about 1993 Dakota

2 Answers

...brake pedal still goes to floor help always bleed front driver side first, front right,left back right back. make sure you always have oil in the master Make sure the calipers are properly installed ...

...AND NO BOOST ASSIST HARD BRAKE PEDAL AND NO BOOST ASSIST you either have a bad brake booster or no vacuum to the booster.Check for vacuum while running if you have vacuum replace the brake booster

...installation? bleed brakes in proper order?RR LR RF LF? does it have a power booster between master cyl.& firewall?check for vacuum to booster.when ABS isn't working you should still have ...

...brake booster had to remove master cylinder to do so aftervreplacing booster brakes are fine but the aqbs and brake light stay on sounds like the brake fluid level sensor maybe stuck . it is in the ...

Question about 1997 Dakota

2 Answers

...brake booster uses engine vacuum to operate. I suspect when the pedal fades to the floor is when the booster has a vacuum leak which also affects the engine as the brake booster gets its vacuum from ...

Question about 2004 Dakota

1 Answer

...brake booster and bled master cylinder. still need to assemble the drum brakes but the brake light is staying on. i read up and pushed the brake light swich as far up as it goes,but when pedal is ...

...and pads new,put new master cylinder and booster on.now we cant seem to bleed brakes,pedal goes to floor and the abs and brake lights stay on the reason may be : the brake booster is lack of

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Dakota
2001 Dodge Dakota

1,021 Questions

1998 Dodge Dakota
1998 Dodge Dakota

870 Questions

1997 Dodge Dakota
1997 Dodge Dakota

712 Questions

1995 Dodge Dakota
1995 Dodge Dakota

723 Questions

1992 Dodge Dakota
1992 Dodge Dakota

618 Questions

Manuals & User Guides

Loading...