Questions & Answers for: Mercedes-Benz 560-Series brake booster installation

Question about 1991 560

1 Answer

...BENZ 560 Recall ID from NHTSA: 90V033000 Auto Recall Date: 19900126 Vehicle Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS Estimated Vehicles Affected: 594 1990 MERCEDES BENZ 560 ...

Ad

Question about 1991 560

2 Answers

Rear shock height Just installed above new electrohydraulic shocks-and ride height is too high--Benz techs say the height is fixed and can't be lowered-whats the truth? Whats the xact height of the ...

Ad

Question about 1991 560

1 Answer

I have a 1986 mercedes 560sel with AMG package. The a/c was converted from R12 to R134. At times the a/c is cooling and then it periodically stops gets warmer and then cools again. how to install a ...

need radio code for 560 sec benz radio asking for code after new battery installed Contact your local Benz dealer with your VIN number in hand. They will be able to give you the code for your radio. ...

...tank.it will be in box with a cover with screws.look for fuel pump relay in the fuse box next to brake master cylinder

My heater and AC blower has stopped working in my 91 merc 560 SEL check fuse. It is outside of fuse box in a black plastic strip fuse holder by the brake booster.

cruise control will not disengage with brake pedal, only with switch on steering column have you checked to see if all your brake lights work? most of time, the cruise deactivation is the result of ...

Question about 1991 560

2 Answers

...on for it, then maybe one of the wheel speed sensors is bad or not sending information to the abs brake module. Anti-lock Braking System = ABS. It is a system that detects when a wheel begins to ...

Question about 1991 560

1 Answer

abs light stays on That indicates that the ABS (anti-lock brakes) need service. You should bring it to a mechanic to be repaired. When the ABS light stays lit you will only have normal brake ...

Question about 1991 560

1 Answer

...brake booster to find out if it is working properly or not. Thanks Find a way to pressurize the booster. At the suction port of the booster you would have to fabricate a tire valve and maybe install ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...