Questions & Answers for: brake pedal

brake pedal, the brake pedal will move away from the brake light switch and cause a close circuit and the brake lamps light up. There is a rubber bunk on the pedal which pushes against the brake light

...brake pedal is hard and it acts like the brakes are stuck on at other times the brake light is on but pedal seems ok when pedal is hard and the brakes seem stuck you can not move the pedal back brake ...

...brake pedal brake light switch mounted on brake pedal. if there is voltage present depress brake pedal and dcv shold be present on other terminal of brake pedal switch. if not replace brake pedal ...

...brake pedal is stuck and it needs replaced,Its got like a push button setup when you apply the brakes the brake pedal pushes the brake switch button in brake lights come on and when you relase the ...

...brake pedal the car will not shift out of park but teh brake lights turn off??? CHECK BRAKE LIGHT SWITCH TO SEE IF ITS TOUCHING THE BRAKE PEDAL.IF BRAKE LIGHT SWITCH OR BRACKET LOOSE AND AWAY FROM ...

...brake pedal arm. It has voltage going to it, and when you depress the brake pedal, the switch closes and let the voltage go to the brake lights. (These switches are adjustable) BRAKE SWITCH IS A ...

brake pedal down a few inches, then pull the switch plunger rod out of the switch toward the brake pedal arm, as far as you can without using excessive force. Next, return the brake pedal to the pedal

Brake pedal kawasaki 600zzr Replace brake pedal since the tip of the pedal is broke. Hard to brake! Is the following helpful? The following picture is the Kawasaki Ninja ZX-6R 2007 Brake Pedal ...

...brake pedal is to soft when you apply it and seems like is not going to stop but it does, what is the problem? I have brand new brake discs and pads, the car doesn't have leeks on the brake ...

brake pedal position sensor receives a low reference signal and a 10-volt reference signal from the BCM. Whenever the brake pedal is applied, the brake pedal position sensor applies a variable voltage