...break lights worked but not my left and right break lights. After research online, I found that the multi function switch was the problem. Replaced the part and my left and right brakes are working ...
break lights not working look up above your brake pedal and you'll see a brake switch - this controls your brake lights and it probably needs to be replaced
abs system the abs light comes on and then my breaks fail. it does a skipping. and now there is no pressure in my breaks at all it is a failed wheel bearing.the hub and bearing comes with an abs ...
...break lights won't turn on. all the bulbs have been changed. I was told it may be the break light switch? Is it something I can fix my self?? Hey the switch could be a problem but before you do that ...
i dont have er or lower break lights the top break light is working Bulb is probably burnt out.
break lights not working but all 2001 GMC Jimmy break lights not working but all other tail lights work including third break light. Turn signals work fine. Checked fuses - fine, checked bulbs - fine.
...break lights dont work, and all other lights work Check the brake lights fuse in the driver's side of the dash; check the brake lights relay in the distribution box under the hood; check the brake ...
Break lights work but no tail lights. 1995 GMC Jimmy 4.3 Vortec. Thanks for choosing FixYa and welcome. You need to check your bulbs and fuse. If it is not them, you have a bad wire and will need a ...
...break lights won't light when i push the breaks but they work for every thing else like 4ways turn signal but when i go to stop they dont light up i replaced the switch and the bulbs but still ...
Break pedal goes straight to the floor. ABS & Break light is on for the last year or so my ABS light has been on. A lot of times m first stop would feel like I was sliding on ice (but wasn't). About 2
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions