...broken or out of alighnment with the eject switch? Anywho if you unplug the unit it woulnd hurt for you to open the unit to check the belts worm gear or eject switch but if your not handy andy then I ...
vcr tape will not eject My VCR tape will not eject from the player. Your drive belt is broken If the machine is turned off and cools down, it will eject on mine.
eject button not working Listen for any motor noise when you press eject. If you hear the motor, then the eject belt is probably broken or loose.
...the intake/ eject rubbers are not working this is almost always due to a broken drive belt take the top of the stereo and have a look for the intake wheel see if the belt is broken and then replace
...the intake/ eject rubbers are not working this is almost always due to a broken drive belt take the top of the stereo and have a look for the intake wheel see if the belt is broken and then replace
Question about DVD-A110 DVD Player
eject the dvd player it won't open. Help! If you take off the top cover you might find that a drive belt that moves the tray is either off or broken. They are cheap to replace you just need to
...belt that drives the eject portion of the unit has broken. I suggest you remove the unit and have an teckie look at it. belts are available for most makes from tandy or other electronic parts
eject, the fault should be with its mechanical side. Check and replace the disc loading mechanism. Prior to that, check whether the loading belt is broken or not. If broken, replace it. If you wish to
...belt is broken the CD inside will not eject. If the loading motor is defective, the CD mechanism won't eject. Anyway, the CD loading mechanism is defective.
light comes on when I push the button on the box itself but won't eject. The rubber eject belt either has stretched or has broken. You can replace it with a properly sized O-ring from a hardware store
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
