Questions & Answers for: broken shift assembly

Question about 1999 Sportage

1 Answer

...or broken transfer lever mechanism Difficult or impossible to shift Insufficient or improper lubrication Shift fork worn or damaged Worn, bent or damaged shift rods Worn, bent or damaged ...

Ad

Question about 2004 Navigator

2 Answers

...shift button broken I have a 2004 Navigator. The button on my gear shift knob is broken (stays pushed in). I can drive it but do not have to press the button to move the gear shift. It just slides up ...

Ad

Question about 1998 Achieva

1 Answer

...won't shift into park. Shifts between R N D but can't get it to shift to P. remove molding over shifter assembly and check for any broken parts or items that may have gotten in causing any ...

...broken. How does the linkage to the transfer case come apart? Shift Lever NOTE: Remove the shift ball only if the shift ball, boot or lever (7E067) is being replaced. Removal Raise vehicle on hoist ...

Question about 15.6v Ni-mh Cordless Drill - Ey6432gqkw

1 Answer

...engaged, if so then could be a couple other problems like a broken gearbox assembly, slipping pinion gear or the shift assembly not engaged in the shift ring. Let me know if you need more

...you hold up the shift lever Shfiter fork assemblly has gone bad.Need to drain oil and open side case to see whats broken on shift fork assembly.If no motor exsperience dont attempt.Bring to

shift broken inside column 2000F250 ford truck, 7.3diesel Transmission in drive now, but lever just flops and won't go into reverse, neutral, nor park. Weather was cold, and lever very stiff ...

Question about 02-05 Envoy Chevy Trailblazer Transfer Case Computer Tccm 4x4 12584313

1 Answer

...shift lock The shifter assembly does not see that the vehicle is in park. Check to see if vehicle is in park and try wiggling the shifter whole turning the key. May also have broken wire to shifter ...

...Shift Valve Bore Plug Misassembled 4th Band Burned, slipping, missing 4th Servo Cover Cracked 4th Servo Pin Broken, seized 4th Servo Piston Damaged 4th Servo Seals Rolled, cut or damaged 4T65-E ...

...Shift Cable Adjustment in Automatic Transmission. The rack preload spring is broken or weak. Replace the rack preload spring. The park lock cable is not adjusted properly. Adjust the park lock cable. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...