Question about PE770 Computerized Sewing Machine
...Brother PE 770. All was well, fairly new machine and whipped stitches out correctly. All of a sudden it is shredding the top thread and it almost seems the bobbin is not catching. Would this be the ...
Question about PE770 Computerized Sewing Machine
...brother pe 770 and the bobbin will not catch the thread. The thread will wrapped and tangled up around the bobbin case and bobbin, but will not catch the bobbin at all. I chcked the needle, it is not ...
Question about PE770 Computerized Sewing Machine
...the top thread has a dark discoloration. the thread seems to shred or unravel at times check for burrs around the needle plate areaa & in the bobbin area or any where the thread ...
...needle plate & in the bobbin area for lintmake sure the bobbin is turned correctly in the bobbin casethe tension dial may need to be replacedif the suggestions don't help,having the machine ...
Question about PE770 Computerized Sewing Machine
...Help!?!?!? Check your needle, your needle plate, bobbin, bobbin carrier and shuttle for burrs. smooth with fine sand paper if you find any. If it's a needle... change it.Good ...
... try rethreading the machine top and bobbin also try a new needle make sure that the top thread has not come off the top thread takeup lever clean under the needle plate and in the bobbin area for ...
plate is scratched or bent. If you are stitching Free Standing Lace on this machine or a piece with over 20,000 stitches I recommend starting with a new full bobbin and a new needle. As you get toward
Question about PE770 Computerized Sewing Machine
brother pe-770 upper thread breaks after the needle broke the needle broke, so replaced and such. The problem that won't go away is the upper thread continues to break after 10 stitches. it looks like
Question about PE770 Computerized Sewing Machine
...Brother sewing machine, that I can change the needle position to L/M/R and I see it move when I move it left and right. I guess you've probably checked all of the other settings on your machine? Is ...
Question about PE770 Computerized Sewing Machine
...PE770 brother embroidery machine First thought is top thread is not feeding evenly. Thread must unwind in proper direction and spool cap needs to larger than spool diameter else thread may snag. See ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions