Questions & Answers for: bush washing machine flashing start

...washing machine stops working about 10 seconds into any cycle. The Start and Start Delay buttons then flash together 10 times, there is a pause and they then flash together 5 times, a pause and ...

...bush WM-1260TVE washing machine, cant get the machine to start off the strat/pause button doesnt even light up, any sugestions?? Check to see if the power is getting to the machine. If it ismake sure ...

...washing machine won't start. I bought it yesterday. The start/pause button is lit for a about minute after the door has been closed. Then, there's a couple of electronic-sounding clicks, and the ...

...bush A126q it's just stopped working, mid cycle. The start/pause light comes on. Door locks. Then after a while of nothing, the start/pause light and the programme ready light start to flash. But ...

...light starts flashing when i try to start wash when i start the cycle for washing , it starts but stops just berfore water goes into it and the start/pause light starts flashing door inter ...

...washing machine worked for an hour but then this problem happened. It is an Electrolux EWF 8040W washing machine Obviously, an alarm is displayed after some time. The alarm is displayed by a repeated ...

Bush washing machine error code 8888 what does this mean Error code Err 08 The start/pause light, program ready light and program end light blink. The motor has failed. Shut down your machine and ...

...bush washing machine wont work, i started cycle as normal but then paused it, tried to start again and all the lights are flashing and the doors still locked? check brushes on motor.......... ...

...bush dishwasher flashes about 5 minutes into a cycle and the machine just stops ... How can I fix this ? First we need to know what brand we dealing with and usually the light flush so many times and ...

...Machine wont start a cycle. It can do a clean cycle which I find a little odd. Checked hoses and pump area with no obvious issues. That sounds like you are on Pause or Delayed Start. Try Pressing and ...