bad cam or sensor Could you explain how it could be a bad cam or cam sensor? Check this out.. The cam sensor wires and the Ignition coil wires CAN interchange.. If you reverse them.. It'll blow the ...
I have a 91 olds Ninety eight regency elite Intermittently dies code 41 comes up cam sensor circut replaced cam sensor still dies could it be the crank sensor? thank you Michael Dale cam sensor is ...
This sensor send informations to Engine Control Unit about camshaft position and speed. If the sensor is faulty engine stops! Crank sensor senses crank shaft rotation . cam sensors sense cam rotation
no start, no spark, no cam reference signal at pcm, has 5 volt supply at cam sensor and ground at cam sensor. I thought it would start with the cam sensor unplugged, it would just have a long crank ...
Question about 1996 Caravan
turns over but won't start. Had a cam sensor error changed sensor turns over but won't start. Had a cam sensor error code a few days ago. Changed cam sensor and still same problem. You may have jumped
cam sensor what is cam sensor The Cam sensor is used for fuel control you have cam position sensor one on the exhaust and one for the intake.The use of a cam sensor improves mixture for each ...
Question about 2005 PT Cruiser
change cam and crankshaft sensor for pt cruiser 2005 and still in the diagnostic problem cam sensor change cam and crankshaft sensor and still in the diagnostic problem cam sensor just remove the ...
Question about 2005 PT Cruiser
2013 captiva cam sensor replacement. Car stalling at lights.Code reader said cam sensor. Changed it but still stalling best to change cam and crank sensor as they both need to work together. if either
i have trailblazer 2008 4.2. p0014 and p1174 0014 = "B" Camshaft Position - Timing Over-Advanced or System Performance Bank 1 1174 = Citroen/Peugeot: Cam Sensor Fault Daewoo: ETS VALVE STUCK - CLOSED ...
2004 dodge 4.7 will start with the cam sensor unplugged will also continue to run after plugging the cam sensor in but if you shut it off it wont start with the cam sensor plugged in you have to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions