Questions & Answers for: canon camera wet card

...canon powershot s60. I tried to take a picture earlier and the screen is completely white. The camera turns on, the battery is fully charged and there is nothing wrong with the digital card. THe ...

camera would not turn on. I need a wiring diagram of the power on circuit so I can trouble shoot. Does anybody know where to find this on the net. I have changed batteries, removed and inserted memory

...camera got a little wet a month ago (in uganda!) and then worked fine once dried out until i got a memory card lock error. the card is fine - something wrong with the camera. i'm trying to figure out ...

...Canon 1000D suddenly stopped working. No mode selection information comes up on the LCD when the camera is switched on. It still tries to focus and take the shot but says busy on the viewfinder. Also ...

...canon support, and they said to hard restart (1. take out batt/memory card 2. turn the camera to on. leave for 20 seconds 3. press shutter button 6 times 4. let sit for 30 minutes) Then to use it ...

...Camera got wet. Now will not playback pictures on card or will not take new pictures. Can this be repaired? Hi Sorry but I always tell people with water exposure their camera is pretty much shot. The ...

...Canon EOS Rebel Xti in the canal while kayaking. I removed the battery and the memory card, dried it as best I could and removed the lens to let the camera body and lens dry out. After about 20 hours ...

...Canon 7D in the water, only a little bit wet. Removed card and big battery and lens and dried it. When I put it all back on there was no life at all. Any ideas Steve Not sure what "dipped" means. Was ...

...Canon Ixus 105 got a bit wet, now it won't turn on and indicator light at the back is red/orange?? Sit the camera in sunlight for few hours until its get warm and make sure the battery and ...

...camera is water damaged. Canon repair manuals indicate the E23 error is generated from the "PCB board" (main camera electronics) so the only option would most likely be a board replacement. HOWEVER - ...