...radio to another source. Make sure the NB/ANL switch is flipped/turned on. To make sure that is the noise, have CB turned on and flip the ignition switch to the on position right before starting. The ...
...cb is one, there is a lot of static as well as my radio being walked one/over by higher transmits. how do i eliminate the static and how do i raise my transmit to a higher level? You could peak and ...
...static noise on the rig. SWR and coax both fine. The rig works fine in my car and truck Hi, CB radios use a frequency range and technology that is prone to noises both atmospheric, and man made. The ...
...will not pick up just static. my dx 88hl radio will not pick up - it just has static. turn up the rf gain all the way. Make sure the coax is connected and good. Make sure the SWR is lower then
...cb radio cobra 75 wx st connected to glass mount Vector CB antenna. power source is acessory plug in on Roadtrek van antenna cable is zig zag to the radio. load static is the same with engine running ...
...area may have implemented the broadband power line initiative (BPL). This produces a strong buzz of noise that obliterates all weak to moderate radio signals between 2 and 80 MHz (CB being at 27
...radio, you will just hear static all the time when no one is talking. If the static bothers you, you can always back the RF gain down a bit. That will quiet the noise, but lower you receive range. ...
i have a dx 929 everytime i go under powerlines it gets a ton of static very fast the export style of radios have a wide band rx filter. not like the cobras and unidens. so they will pickup more ...
...noise in a 93T galaxy cb radio doesn't make a difference what radio,if you have static it will be in them all . Buy yourself a noise clipper ,about 27 $$$ and that should help you with the
midland 75-785 static problem all the radio is getting is static. On every channel. Static. Nothing else! bad ground
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions