Questions & Answers for: cd drive ejecting

...CD drive and "re-hook" it to the motor. If you are running an operating system other than windows such as Ubuntu, it will disable the CD drive eject button when in console mode, in which case you can ...

...cd/dvd drive you will see a small pinhole use a pin and insert into that, the cd drive would eject, ITS A MANUAL EMERGENCY EXIT BUTTON ON ALL CD/DVD DRIVES, INCASE THE CD DRIVE DOESNT EJECT normally ...

CD Drive wont eject after pressing the eject button...pls help... 1. right click on the drive. 2. press 'Eject' option. this will intern send the software interrupt to the drive to open it, if your cd

...of direct load drive that does not involve taking the unit apart and destroying the warranty. Any help appreciated. turn on the PC and insert a pin in the small hole on CD drive.it will be

...may help to release the inserted CD. Important: After ejecting the disc with the manual eject button, you must restart the iMac in order for the CD-ROM or DVD-ROM drive to work. DONT FORGET TO ...

CD drive u will find a pin hole which is used to eject the drive tray manually so use a pin and try to eject the CD. good luck Sometimes the hook that retains the tray will not release unless the tray

...CD/DVD drive, until you feel "resistance". Then, push it another 1/4 inch, and the drive-tray should "unlock" and open slightly. Then, gently pull the tray fully-open. Remove any CD/DVD media. Then, ...

cd drive wont eject Try ejecting it through "My Computer". Right click on the drive and select "eject". If you can't locate the drive, then it's probably missing the driver. Hello OK, in some cases ...

...CD drive and drive opens by sliding out 2. Clicking on my computer which shows all the drives C: D: E: etc. C: is hard drive so can not be ejected. Right click on the D or E where ever the CD is and ...

cd CD Drive Tray problems There are two ways to open the CD drive door if the button just below the drive tray does not work. Go to My Computer and right click on the drive and click on Eject. If this