Questions & Answers for: central locking working subaru

central locking - no go Fuses all ok. Any clues?? Cheers Terry could be the ignition key contact with accessories. all parts you mentioned are connected to the accessories. wiggle the key and it might

...Central Locking I have a brand new Subaru Impreza and neither of the remotes will unlock the doors of the car. There is a red flashing light on the das which is not flashing normally, it is flashing ...

...central locking switch on drivers door in the unlock position .interior lamp will flash and an acoustic sound will be heard. now get your key and press unlock and then lock the door should lock then ...

...central locking. try locking the car with the key then pressing and the holding the unlock button on the remote for 30 secs, see if the car unlocks.if not unlock the car etc....or... put key in door ...

central locking not working with remote works on door when button is pressed and stoped after installing car speakers and sub if you disconnected the battery when you fitted audio system just reset ...

...central locking (passenger doors or boot) works. There is a vague click from behind the glove box somewhere, but that is all. Entertain the possibility that feature was bad, killing the battery over ...

...the central locking wasn't working at all even with the key the other doors still didn't lock. You will need to contact Subaru on this, we have no reference books for this type of cross

central locking 2005 subaru liberty stopped working on 2 doors 2005 Subaru liberty central locking stopped working on drivers front door then latter passenger front stopped. rear doors and boot are ...

...central locking does not want to work via the keyfob. I have to manually lock and unlock the car. according to the installer; he found a 2 core wire unplugged by the footend of the drivers side and ...

central locking module key fobs have new batteries but operation lock/unlock doors is intermittent. Works fine only if car is in the sun or hot after a long drive. clean the ir sender on the ...