Questions & Answers for: change starter jeep liberty

Question about 2004 Liberty

1 Answer

change out starter 2004 Jeep Liberty Starter should be pretty simple but they always put them down below in hard reach areas and pain the *** get out back in . Only has few connection dis connect the ...

Ad

my jeep liberty clicks but wont start immediately it takes several turns of the ignition if it clicks but power is good then the starter should be changed.

Ad

...change starter and battery checked the power and ingintion wire going to the starter they checked out ok still wont start are you getting power to the solenoid wire on the starter the small wire?if ...

Question about 2002 Liberty SPORT

0 Answer

wont turn over makes a click sound changed the starter and battery still acts like trying to turn but wont engage The click sound is the starter relay closing. The pinion gear of the new starter may ...

Question about 2006 Liberty

1 Answer

starter relay to see if its bad or do I need to go to the dealership. The auto class at my sons school has been trying to pinpoint the problem and has eliminated everything but the relay. the car will

...starter relay terminals 87 and 30. Disconnected battery terminals overnight and reconnected in morning before one start-up. unable to duplicate results. No Engine codes, although malfunction light ...

...change the idler air control sensor, TPS, Camp Shaft sensor, Crank Shaft sensor, starter, and brand new battery but it still wont start and battery got drained just by trying to start it??? help Do ...

Question about 2002 Liberty

1 Answer

...jeep liberty has an intermittent starting problem. The starter makes a grinding noise usually when started and has for a while. could these two be related? Yes. When was the last time you had the ...

...jeep liberty will not crank with key in start position I have replaced ignition switch and the actuator is not broken but engine will not crank when key turned to start position, all fuses and relays ...

...jeep liberty 2.8 cdr 2006. the starder motor went and i changed it, now there is no life going to the starder Recheck the wire connections. Also the battery cables. If you shorted a wire while ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...