Questions & Answers for: change turn signal bulb 2008

2008 Dodge Avenger electrical problem When I turn on my car, the lights go on automatically even when I have them turned off. I cannot turn them off when driving and the high beams will not turn on. ...

...turn signal because he saw that the bulb blew and he thought that would fix the problem. it didnt. my hazards work though. what could be the problem? try to replace the flasher. it is round and has ...

turn signal it will blink 5x normally and then speeds up as if a bulb were out. I've had it checked and the bulbs are fine - has to be something internal. I'd rather not take it to the dealership (not

i have 2008 Dodge Avenger, how do i change my turn signal bulb? You might have to take off the corner lenses

...change the turn signal bulb? You need to squeeze the little 'fingers' on that white piece to allow the taillamp assembly to be removed. See the YouTube video at the link. How to remove tail lights in ...

Turn signal is making a fast clicking noise and signal light is not working. Is this a fuse or a bulb issue? One or both of your turn signal bulbs is blown.

...turn signal will not work. The right rear turn signal in my 2008 avenger went out so i replaced the bulb. that seemed to fix the problem for only a few hours before it quit working again. the bulb ...

...change for my signals to work? It's been 4 months; by now you should have fixed your problem, but if not, you'll just have to look at the owner's manual and figure out which fuses go to the turn ...

Only the high beam is working on drivers sidebAlready replaced bulb.Turn signal not working in front either Since the two circuits are not related, I would say its a wiring or connection problem.

...off driving. Plugged in and said issue with both rear turn signals. Could it be a ground issue? Bulb for signals just changed be sure to use standard bulbs.not heavy duty or led,also check the ...