washer wont start cycles. when i start the washer it makes a humming sound, and smells like electrical burning. If I spin the tub a few times it will start, but when the next cycle is supposed to ...
Question about PAV2300 Top Load Washer
belt on a Maytag Washer #LAT2500AAE The belt to my washer was lying on the ground and the washer does not drain. I removed the front panel and do not see where the belt would go. I also do not have an
Question about PAV2300 Top Load Washer
maytag mav5000 spins but clothes are still very wet? changed the belt already not much difference Slipping belt
...washer and it fills up it won't spin it is starts making a noise and you can smell rubber burning. The belt may have shifted off the pulleys. Sort of like a chain falling off of a bicycle. You will ...
washer wont spin. Makes a humming noise and a burning smell your belt needs changed. and i would check the pump to make sure its not siezed
tightening the motor for the belt tension maytag model#pav2300aww top load washer the glides on the motor do it change tem
...and will not drain the burning you smell is probably your belt. if you change the belt and it still has this problem then your transmition has failed. This is a very comon problem with maytag
...pav2300 is a single belt / this is the majic chef style / only thng that changes form reg to gentle is the speed of the motor . so i would thing that the motor pulley maybe bad. / if so change the ...
Not spinning. The belt and drive pulleys work fine, but the inner tub does not spin or move freely. Any ideas on what could be the cause of this? gear box damaged from inside need to change it
Question about PAV2300 Top Load Washer
how do i change the belt on a maytag legacy series washer See if this video helps you.
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions