Questions & Answers for: changing tension pulley 2007 honda

AC Pulley Tensioner Cant get AC Tensioner pulley off. . it locked up. I cannot get a wrech on or a space saver socket and box end wrench. Are the threads left handed by chance?? No the threads are ...

...honda civic hybrid and i dont know where the tensioner This is difficult to describe online but im assuming you mean the drive belt. So im going to try to explain this. There are 4 pulleys, 3 shaped ...

Honda civic dx 1998 has started making noise when you crank it and while you drive it sounds like an airplane.. any suggestions on what the problem may be? Probably a belt pulley and or belt tensioner

...entire compressor. Tensioner for belt is separate part and it is easy and cheap to just replace pulley. Use 10mm socket to relive tension, then use 14mm open end to remove one nut attaching

...sounds noisy it a 2007 2.2 diesle honda civic could be a timing belt tensioner as well so ask a local mechanic to have a look and a listen and then he will be able to point you in the right ...

...Pulley, because you have to remove the Timing Belt Cover to remove the belt, adjust tension, and line up the Timing Marks. Here is the Service Guide for the Timing Belt on your 1994 Honda Civic 1.5l ...

...pulley on honda honda ridgeline As you can tell from the picture it isn't too easy to reach. So you'll want to go under the vehicle to get at it I think. Release tension on the belt by pulling on the ...

...changing alternator The alternator has a bolt that is adjustable to keep tension on the belt. There should be a single bolt that is fixed, and probably another that sits in a slot in the bracket that ...

how to replace a/c compressor belt on 2005 Honda Civic Hybrid RELEASE THE TENSION PULLEY, TAKE A PICTURE OF THE ORIGINAL, TAKE IT OUT AND RUN THE NEW ONE IN. APPLY THE TENSION PULLEY.

What tools are required to replace tensioner pulley on 2013 Honda Civic