...Check Cassette#2" will appear if the 2nd cassette sensor does not detect the paper cassette. So my thinking is that 1: the cassette is not seated in the printer correctly (not trying to be insulting, ...
check cassette #2 reinstall cassette properly. I have no idea even where the cassette is........ cassette is in front, put hand on bottom front of machine and pull, check to see if it is set to letter
...check cassette #2". The toner is set in there properly and the paper is loaded incorrectly also. There is no jam. Any ideas? Thanks in advance, John 1-pull the paper cassette out-fan the paper and ...
...cassette #2 properly". It is installed properly. Turned machine off. looked inside, no paper jambs, cassette seems to be okay, reinstalled just like 100 x's before... Still same message. Checked ...
...us to Check cassette # 2, reinstall cassette # 2 properly??? it is referring to the paper holder (cassette ), it's expecting to get paper from cassette # 2 check settings for paper source and change ...
check cassette #2 reinstall properly do you have a cassette #2 installed? If not, you can tell the machine in the menu settings that the cassette #2 isn't installed at all. menu (set) general settings
Question about - Canon 2 X 500 Sheet Cassette Feeding Unit-AD1 - 3654B001 Paper Cassette
...cassette feeder unit-ad1? This trouble maybe power supply or inverter boards is defective. first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find ...
Question about - Canon 2 X 500 Sheet Cassette Feeding Unit-AD1 - 3654B001 Paper Cassette
Check to make certain all of the doors on the Cassette Pedestal are completely closed. Note: These doors are located on the lower left side. (2)In service mode: (DORSW1/DORSW2) tested good. Solution :
Question about - Canon 2 X 500 Sheet Cassette Feeding Unit-AD1 - 3654B001 Paper Cassette
...cassette pedistal. check all the connectors. make sure you have programmed the correct size for this unit in additional functions ,make sure of a a4 or ltr selection where ever your at in this
Question about - Canon 2 X 500 Sheet Cassette Feeding Unit-AD1 - 3654B001 Paper Cassette
Check the condition of the gear at the host machine side (to see if there is something missing or swing with the gear) 4-2. Check the Cassette 1 Lifter Motor (M14) 5-2. Replace the DC Controller (UN09
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
