...choke cable on a yamaha fazer is it much of a job to change the choke cable on a yamaha fazer 1000 ? choke cables normaly last for ever, so it prob needs just a bit of oil. remove upper end of cable, ...
choke cable, there were clues. Thanks! The problems with a plunger style choke happen when the rubber on the bottom becomes deformed and does not seal or the spring does not push the plunger down hard
...choke cable is there but not installed the cable just hangs. Does any one know how to fix the choke cable on a 2001 Yamaha r6 ? hi, this is the best way to replace the choke cable, first remove the ...
...choke cable on a 2005 yamaha viagra, 250 cc not sure how to do this Remove the Phillips head screw under your choke lever and retrieve the wave washer and other small parts there. The cable, with a ...
...choke cable and manually operate the choke lever until you are able to replace the cable. Depending on the severity of the bend in the cable, you may also be able to straighten the cable housing out ...
...adjustment or rebuilt most likely The choke cable has an adjustment on it... it may not be pulling the plunger up enough to work properly.. a good cleaning/setting by a professional should fix
...choke..if the cable is bending instead of closing the choke, then the choke must be sticking...it should close very easy. I would try just cleaning it with some carb/choke cleaner...maybe some ...
...choke cable I have a 2005 Virago. The choke cable has become disconnected in the carby body itself. The choke cable moves in and out. I have disconnected the cable at the handle bar end and pulled on ...
...choke off but it wont stop choking my motorcycle is a yamaha xv2 275cc Might sound stupid but have you made sure that the cable is functioning properly? and that the choke is not stuck permenantly
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
316 Questions
292 Questions
