Questions & Answers for: choke position

...position of the choke. I've seen two ways: 1) The electric assist might be able to be rotated or re-positioned by loosening its screws. 2) The choke positioning lever can be bent or extended by ...

forgot which position switches should be and choke on/off position choke on when starting one pull or two choke off when running. line up/ down is full choke , slant line is no choke.

...lock in tho closed position for starting anymore. i have a jonsered 2050 Been a while since I saw a Jonsered but I think if you bend the choke linkage a little that it will stay in the choke

...engine the choke is used only to start the engine. If you unit is newer and still does not run well with the choke in the open position, you may need to adjust the hi-speed circuit to a richer

what is the choke on position on a '03 dr z125 What is the choke position on a superbyke rcc 125 The choke is on when in the down position

...choke position I have a homelite trimmer Model # UT20044b, serial # AH1644683 and the engine is 25cc 5HCPS. I changed the spark plug this morning and it is still very difficult to start. Once it is ...

ingine stops after started in choked position on stihl weed trimer Try leaving it on choke or half-choke until it warms up ( a few minutes)...then move the choke to the RUN position.

...choke position, engine starts but chokes when I move to next choke position. I toggle back to 1st position, engine revs up, I move to next choke position engine revs briefly then begins to stall out. ...

...choke position Pull starter rope sharply until engine attempts to start, but no more than 5 pulls. Move choke lever to half choke position. Pull starter rope sharply engine runs. If engine hasn't ...

...choke position Give a couple slow pulls, then a good strong pull... (The unit should burp, run for a second) Next put the choke lever in the half choke position Pull rope It should start and run, now ...