Questions & Answers for: Maytag clock

...on from touch pad, oven not working. Please help Rizon My range showed a code of 5A6, I held the clock key down for a few seconds and it corrected itself. yes hold the clock key for several

the digital clock seems to be set to 24 hr insted of 12 hr time could you tell me how to reset back to 12 hr maytag mer5552baw No Problem here ya go To change the clock to 24-hour format: 1. Press and

...Replace touch pad or membrane (usually the touch pad)* F1Watchdog on boardReplace touch pad or clock assembly (also called the ERC) F2Oven too hotReplace relay board (if present) or bad oven ...

...Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock ...

...Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock ...

...or membrane, usually the touch pad. Here is a simple test that you can do to determine whether the clock or the touchpad are defective when the display reads F1: Disconnect the power to the range ...

Maytag MER5730ACW Stove.F3 fault code. Maytag MER5730ACW Stove. Replaced faulty ERC/Clock panel. Worked fine for a week then got an F3 Fault code. Replaced the oven sensor/probe. Worked for a few days

elements and light in stove work but clock and stove do surface elements and light in stove work but clock and stove do not. The issue would have to be in the clock or the power wire going to the ...

...Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or clock (ERC) Replace touch pad or clock ...

elements work but both ovens and clock face are off Reset breaker or unplug and restart stove. Open back of stove to clock face and make sure the harnesses are tightly fitted to clock board. You could