Questions & Answers for: clogged toner

...clogged / toner chute will undertone the system in a very short amount of time, and will result in a service call being needed, and possibly damaged to internal parts. In severe cases where customers ...

ll have to remove the auger and knock out all the clogged toner. Sometimes sticking the end of a vacuum cleaner into the metal tube will **** out the toner, but not all the time. It's messy. Good luck

...clogged with toner. Remove and then mount back the shutter releasing member to remove the clog, or replace the hopper unit. General condition, Developing assembly toner sensor (TS1) 3) Is the ...

...toner supply tube is clogged, but that doesn't happen very often. To test if it's clogged, take out the yellow toner cartridge and the yellow developer unit and turn the copier off. Use a vacuum to ...

...the toner powders, but the signal is blinking, how to reset the toner indicator Unless the toner system is clogged up, it will go off automatically. Open and close the front door a couple of

...your printer that led it show error flashing. Normally It can cause by 2 things : 1. You have a low toner ( need to replace toner) 2. You have a clogged up toner ( need to clean /service the

...u put toner in) . it's clogged, the best way to unclog it is to put it in ultrasonic tub, or if u don't have one u can put it in some clean alcohol for some time until clogged toner leak ...

...clogged with toner. Remove and then mount back the shutter releasing member to remove the clog, or replace the hopper unit. General condition, Developing assembly toner sensor (TS1) 3) Is the ...

...clogged toner hose from the cup to the toner sub-hopper. If the toner system is not clogged it is a bad toner pump, or sometimes it is a bad toner sensor on the sub-hopper or the cup on top of the ...

...of the pump being clogged. You can try removing the pump and vacuum the toner that is clogging the pump and put it back then test it. If not fixed by it you can also try the Force Toner Supply