Questions & Answers for: Ford F-150 clutch

need to take off fan clutch, have taken off parts in the way 4.9L SFI SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Fan Clutch Holding Tool T84T-6312-C Fan Clutch Nut Wrench T93T-6312-B ...

i was bleeding my clutch now my clutch pedal stuck to the floor on a 1995 f 150 Most modern clutches are hydraulic. It may be that either the clutch master cylinder or slave cylinder are stuck or some

having trouble with my 1989 ford f-150 starting, it is a standard tranny, just changed the clutch and slave cylinder the truck started before I did this. The lights work and all the power options, but

92 f150 300cu inline 6, drove home from work started loosing clutch, got home shut it off checked clutch fluid, it was fine, will not start. is it the clutch to starter relay? Check under the dash to ...

Problem with starting 89 F150 straight drive. Ignition or clutch? I have a 1989 F150 with manual 5-speed. Is there a clutch switch on a 1989 ford f150? If so where is it located? Sit up on the clutch ...

how do you no if slavecylinder is any good A clutch slave cylinder is a device used in the hydraulic clutch system, this item is mounted in the transmission, either on the outside, or in the inside. ...

how do you replace the clutch on a 1981 F150 4x4 tranny clutch or fan clutch? if tranny clutch you will have to drop down tranfer case & tranny -take out drive shafts - maybe loosen exhaust ...

Clutch switch has been giving problem for awhile and now it won't start at all. How do I check this problem and fix it? un hook or( unplug i should say) the clutch switch and jump the wires , now mind

i have a 1990 Ford F-150 ext cab 4X4 larriat XLT and my clutch is going all the way to the floor, but it is not slipping out of gear when i drive, i just have to push it to the floor to get it to go ...

i have have high pitch wind noise from fan clutch after replacement is it normal on new fan clutch it had same high pitch wind noise and could tell that original clutch is frozen but new on as very ...