Questions & Answers for: Yamaha clutch basket

Question about 1999 TRX 850

1 Answer

...clutch basket will require a new centre and brearing and cost IRO £300 -£400 !! I think there is a newer design - is this any better as the component life seems terrible? Does anyone refurbish these ...

Ad

...clutch basket (the part inside the clutch basket that the pressure plates spline onto)? If this is not aligned, the pressure plate will not fully engage the clutch plates. Both parts usually have an ...

Ad

clutch basket, can the groves be filed out and it be reused? Also, what years used the same basket if you file the grooves, the plates will move about and likely break the basket, as the filing is not

...clutch "basket" and clutch hub. (the basket is driven via the crank and the hub drives the gearshafts) They are bound by the springs and endcaps bolted to the pressure plate in the basket. The plate ...

Question about 2003 YZ 250

1 Answer

...the clutch and also the plates twice and it i still sliping in 5th gear do u have any advice on what a should do thanks. Check your clutch basket for grooves. if so you will need to replace

clutch basket is it interchangeable between the two years. I bought a new clutch basket for my yzff 450 but it doesnt fit the center hole of the basket is too small. My basket has a 5TA number on it ...

Question about 2003 YZ 250

1 Answer

...if you pulled the clutch cover and pulled the clutches out of the basket the basket is damaged where the clutch plates make contact with the basket. The rectangle slots in the outside of the

...second gear. Whats the fix? you might need a new clutch basket, it could be worn take out clutch plates and check for groves in the basket they may be sandable but you might have to replace. good ...

basket installed but clutch will not disengage I had a fiber break and the basket cracked/chipped. I replaced the fibers and basket but cannot get the clutch to disengage Hi, Anonymous sorry you can't

clutch basket is worn you want to replace it really. The little sprocket on the back of the clutch basket causes the rattle, it's held in place by two small steel dowels, drill and fit slightly bigger

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...