...clutch too tight took it all apart. the cable rides smoothe by itself, the shaft inside that pushes on the basket rides smooth, the basket is in good condition, clutches and plates r good,but when i ...
...are you shure you have ALL the clutch plates?? the cable is well lubed? the pushrodbearing/adjuster may be in the middle of the clutch basket cover plate. OR you have the wrong springs
...of the motor. Just get a new gasket, and a clutch kit. The basket might be able to be saved with emory cloth. You can get a clutch kit at bikebandit.com change your oil to atf that is for a wet ...
...clutch basket exposed when you pull in on the clutch lever, you can see the clutches move just a bit...not sure if this helps or not sounds like you need a clutch. Yes the friction plates should move ...
torque spec for the clutch basket hub on a 2000 kx 250 torque it back down to 72 ft lb.
clutch hub, and basket. we can't put oil in yet beacuse we misplaced the plug, but when we got it all together and pulled the clutch in and pit it in gear it still grabbed. if you tried the clutch dry
...be that the clutch basket is worn not alowing the full release of the plates, check for exsess ware in the form of groves cut by the plates in the outer and inner basket. thanks for using fixya ...
...clutch basket and discs on a 2002 kx 65 dirtbike? The whole basket isn't all that great to take off....but if you are just changing the clutch plates, you won't need to remove the basket. There will ...
...clutch basket (holds all of the clutches and steels in a "basket") gets grooves in it. These grooves prevent the clutch from disengaging. Sometimes you can file the clutch basket fingers down to ...
Usually answered in minutes!
126 Questions
49 Questions
14 Questions
