Questions & Answers for: KTM SX 125 clutch basket

clutch not fully disengaging When I wind the bike out, the engine is giving me 100% but the bike isn't moving at 100%. It feels like the clutch isn't fully disengaged, but it's a hydraulic clutch and ...

...even when revved to full throttle(on a stand the wheel will turn, just not on the ground, possible clutch problem?) questioned if it was actually the idle screw that we adjusted and about 95% sure( ...

I have a KTM 125sx but my clutch doesn't work. She's looking like a "break". The clutch don't move easily as normally. I have changed the motor and the clutch recently... I would check the work you ...

...sharft .thanks You have an internal problem with the shift mechanism.You will need to remove the clutch cover to identify what is broken.It is rare that you can't fix a problem such as this from ...

...clutch basket in a ktm 50 pro sr,or do you have to buy a whole basket. I dont know of any bearings in the basket. The clutch consists of the basket(drum), clutch shoes(3 of) on a centre hub and ...

clutch basket assembly. The other set is made up of metal, with (often) compressed cork material - these spline into the outer hub. When the lever is pulled in, the spring pressure is relieved off the

2000 ktm 125 sx gearbox. Turn with the clutch in with friction. Jam the back wheel and it turns with the clutch in with the same friction, clutch out in neutral = more friction, and won't turn ...

2005 ktm 125sx how to adjust cluch after it has been bled from bottom..doesn't slip, just wants to move a little when in gear with click in.. The Magura hydraulic clutches on KTM's aren't ...

when i hold my clutch in an then but it in first gear the bike moves? you need to change the fluid and adjust the clutch. There is water etc. in the trans and it effects the clutch.

ktm 125 sx the clutch wont engage and disengage ive replaced the clutch and bleed the lines and the clutch hand dosnt feel like its working at all it feels loose You will need to slightly loosen the ...