Questions & Answers for: Harley Davidson FLHR-FLHRI Road king clutch cover

Question about 2000 FLHR-FLHRI Road king

2 Answers

...clutch hub, under the derby cover in the primary. That should take care of the whine and your problem finding neutral. If you get some teflon spray and shoot it generously down the inside of your ...

Ad

Question about 2000 FLHR-FLHRI Road king

1 Answer

...cover off. Use a pair of snap ring pliers and remove the clutch adjuster bolt from the center of the clutch pack. Remove the nut holding the clutch pack onto the main shaft. This nut has left-handed ...

Ad

Question about 2000 FLHR-FLHRI Road king

2 Answers

clutch oil...Drain plug is at the bottom (uses an allen wrench) and the round cover has to be removed to refill. Just pour it in. The correct level is "up to the base of the clutch assembly" no more..

Question about 2000 FLHR-FLHRI Road king

1 Answer

...derby cover. Remove the derby cover,stand the bike as straight up as you can get it safely, add primary lubricate until it reaches the bottom edge of the clutch spring. 36-44 ounces. Good Luck ...

Question about 2000 FLHR-FLHRI Road king

1 Answer

...cover. In the middle of the clutch assembly, there is bolt with a locknut on it. Loosen the locknut and turn the outward a turn or two to make sure it's loose. Then turn it inward until you feel the ...

Question about 2000 FLHR-FLHRI Road king

1 Answer

cover that protects the clutch cable adjuster. Move this cover up or down, loosen the locknut, and adjust the adjuster inwards to gain a good deal of slack in the cable. Now, remove the primary cover.

Question about 2000 FLHR-FLHRI Road king

1 Answer

...cover? No, the whining noise come from the primary chain as it spinning over the clutch and the sprocket motor.Perhaps the adjustment is too tight,this will cause the noise.Do you check the chain ...

Question about 2000 FLHR-FLHRI Road king

1 Answer

...clutch assembly with the derby cover off, you'll see that the outer clutch shell is made of bright aluminum. Just inside that, the clutch spring is a darker colored steel. With the bike standing ...

Question about 2000 FLHR-FLHRI Road king

1 Answer

...cover. Now, I can't remember whether the '97 clutch had the bolts that hold it together or the snap ring. If it has the six bolts holding the clutch spring in, simply take the bolts out and ...

Question about 2000 FLHR-FLHRI Road king

1 Answer

...the derby cover. The oil should be to the bottom of the outer clutch drum. Do not overfill or the clutch will drag making finding neutral with the engine running almost impossible. Good Luck ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...