...cover. Now, readjust your cable adjuster until you get about an 1/8" freeplay at the clutch lever. About the thickness of a nickle between the lever and the lever perch. Most people like the way the ...
Question about 1993 FXR Super Glide
...cover removed, compensator assembly. removed. Thanks, Dave Isn't there a big nut in the middle of the clutch pack? Also I am not sure, it might be a left-handed one, check the threads first. are you ...
...clutch. If this happens, you'll have to pull the clutch release cover off the right side of the transmission to replace the bearing. It's a little ***** thing about the size of nickle. Good Luck ...
...cover. Inside, you'll see the clutch assembly with the adjuster in the middle of it. Break the locknkut loose and adjust the center bolt inwards until you feel the resistance. Do not force the screw, ...
...the locknut. Replace the derby cover. Go back to the clutch cable adjuster and adjust it out until you have approximately 1/8" freeplay. Lock the locknut and replace the bellows cover. Good Luck ...
...cover off. In the center of the clutch assy, you'll see a bolt and a locknut. Loosen the locknut and turn the bolt inwards until you feel a resistance. Do not force the bolt as you'll start to ...
clutch as a unit, disconnect the battery. Drain the primary case. Remove the primary cover. Take the compensator sprocket nut off. Take the nut off the primary chain adjuster. Now, take the snap right
...cover. Remove the four bolts that hold the clutch spring in. Remove the clutch spring and pressure plate. Then, you can remove the friction and steel plates. If you want to remove the entire clutch ...
cover and loosen the lock nut in the center of the clutch assembly. Turn the adjusting screw inwards or outwards to adjust the position of the clutch release arm. Seems like 1979 was a transition year
...clutch, remove the derby cover and turn the cable adjuster barrel inwards and get a good deal of slack in the cable. Loosen the lock nut on the adjust bolt in the center of the clutch pressure plate. ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions