Questions & Answers for: Yamaha YZ 125 clutch cover

...part number 5NY-15490-00. The assembly comes with a new shaft. The clutch cover mount bolts should be 8 to 10 ft. lbs. This is not a factor in your problem. Please rate this answer. Thanks

clutch casing" do you mean the right side cover for the gearbox or do you mean the primary driven gear (AKA "clutch basket") that the clutch boss (AKA "clutch hub") and all the clutch plates fit into?

...or you have the clutch misaligned. You can check for proper operation with the bike off, and the clutch cover off while pulling the clutch lever. Should be able to see it move 1/4-3/8 of an

...the clutches are hanging up in the basket, or the actuator is bad and not releasing the clutches. The only way to tell is to take off the clutch cover and watch what happens when you pull the

...clutch cover installed is to point the teeth of the rod, push1 forward. Also, remove the push lever assembly #24 from the shaft before installing the cover. Once you engage the teeth of #11 to the ...

...hoses,remove clutch cover,slide shaft out from left to right,(If clutch hub is in the way remove clutch assembly),fit new shaft ,reassemble,replace gearbox oil & coolant & bobs ya

...cover. The gear on the axle engages the push rod and the push rod separates the clutch plates by pushing on the pressure plate to dis -engage the transmission. If the axle shaft is loose, check the ...

clutch cover is facing up. pull the clutch cover off. go to home depot and but a package of 6mm washers. take the 5 or 6 (cant remember how many there are) screws out that have the springs under them,

...clutch cover. The seal did not come out in one piece and my new seal will not go in. I really dont wanna pay 180 for a new clutch cover if i dont absolutely have to. Im very frustrated with this. ...

...clutch cover hi m8 i was on my bike when it started missing gears. Then it locked up and trough me off , when i picked it up under the clutch cover there was two clutch bolts ann springs in the oil . ...