Questions & Answers for: clutch push rod

...clutch would not engage. were thinking that we didn't install the push rod correctly. the push rod goes right behind the pressure plate right? Does the lower clutch lever have to be clocked? The ...

Clutch push rod will not depress to engage 71 Yamaha 360 RT1. The clutch push rod will not engage. I have removed the side plate and tryed to engage the rod by pushing in with a lever. the rod will ...

...push rod to the clutch pedal.then connect the push rod to the clutch master cylinder then refill the clutch master cylinder .by means of pressure tube connect the clutch slave cylinder .then connect ...

clutch push rod broke !!! hi i have a suzuki gsxr 750 f 1985, the clutch push rod has broke into 4 bits plz tell me what is the cause of this and can i be repaired thanks garry Chances are the prior ...

clutch push rod. When the clutch lever is pulled in it moves the clutch arm on the outside of the caseing. This actuates the clutch push lever to push the rod into the center case. The internal end of

...clutch push rod Try to adjust the play in the cable at the clutch perch, leaving play in the cable. If that is ok, then check the push rod adjustment if it has one. Bottom out the push rod screw and ...

...not disengage. Any ideas? Check that you have not lost anything in the clutch push rod ,some push rods have a small ball bearing that fits on the end of the push rod ,and is easily missed or lost

...push rod play are correct. (1) Depress the pedal until clutch resistance begins to be felt. Pedal free play: 5.0 to 15.0 mm (0.197 to 0.591 in.) (2) Gently depress the pedal until the resistance ...

clutch push rod broke. I got a replacement push rod with new clip. I want to put new clip on the end of the existing push rod, which I have done, but i can't push the old push rod back to reinsert new

clutch push rod problems I changed the clutch plates and accidentally squeezed the clutch which made the clutch push rod come out so that I can't get the pressure plate back on. How do I depress the ...