Questions & Answers for: clutch start

...start. The clutch was bad so I changed it. There is a safety switch off of the clutch pedal so you don't start it with it in gear, and the clutch out. This is adjustable,and sounds like is your ...

Ad

Question about 1996 Grand Cherokee

1 Answer

...start when clutch is engaged and it dies when clutch is engaged. Reverse lights work, it will start and run if I start it in gear- ex.- Push in clutch, shift to first then start (turn key)- jeep will ...

Ad

Frequent useof clutch causes clutch pedal to go hard clutch slips i have a hyundai excel 1999 model and the clutch pedal starts to go hard after frequent use then the clutch starts to slip, when i let

...start will run if clutch is dumped If clutch is dumped? do you mean if clutch is pumped? perhaps the slave cylinder for the clutch is leaking, causing low on fuid. Check level, blead if necessary. ...

Question about 1995 Jetta

1 Answer

...start now ( the clutch). I have all safety switchs (3) overridden. Could this be a relay problem Or the clutch switch. Thanks Bill Bill, not sure, but, the engine will not crank with the clutch ...

...start The clutch master cylinder must have gone out, the seals in it have failed. The clutch master cylinder (next to the brake master cylinder) gives you hydraulic pressure so the clutch pedal can ...

Question about 1985 VT 500 C Shadow

1 Answer

...clutch. If still no start, you have a mechanical problem, either with the clutch cable, the clutch pack or the transmission. You can also try using a hair dryer or heat gun to warm the cable and ...

Question about 1985 VT 500 C Shadow

1 Answer

clutch wont engage tried to start the truck when it was -30 out and wouldn't start. when It warmed up it started but the clutch wont engage . not sure if I broke something putting the truck in and out

...& try to start the car but it won't start unless I ease up a bit on the clutch. sounds like its a bad Clutch Safety switch you can try this and see if it works DIY Clutch Start Switch Bypass ...

...start with the clutch disengaged. Or you can strip the clutch, inspect and reassemble. Also inspect the clutch cable and make sure it is activating at the clutch end. 'year make model' in all ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...