Questions & Answers for: code p2127

...p2127 code is an Accelerator position sensor (low input) as is the p(2138) could be moisture or debris in harness plugs. Try using dielectric grease. yes, P2127 refers to throttle / pedal position ...

Check engine light is on, reduced power displayed on dash, code P2122 and code P2127 comes up its a problem with the pedal and throttle position corilation 

...Honda odyssey LX. My pedal not working code p2122 & p2127. van start, moves but pedal not working. how do I solve problem The pedal position sensor is throwing a code. could be ECM may need to ...

2006 chevrolet express 3500 6.6L code p2127 and p2138 vehicle has reduced power message and codes p2127 and p2138 Throttle/pedal position sensor recieving/sending out of range , i'd change the tps

p2127 code as accelerator pedal position (APP) sensor/switch E-- low input === causes wiring short to ground--APP sensor / switch. IT depends on the manufacturer as to the definition as the TPS can be

...code p2122 and p2127 check your aps sensor,accelarator position sensor if its bad and make sure all connector and wire from this sensor to ecu is good,. DTC P2122: Throttle/pedal position sensor ...

code P2127...what does this mean??? code p2127 refers to accelerator pedal position sensor/switch E --low input==causes wiring short to ground-- APP sensor/switch--TP switch short to ground--TP sensor

...P2127 code means that the throttle or pedal position sensor switch E has a low input. The pedal position sensor is a sensor found on the gas pedal. The sensor tells the ECU when the gas pedal is ...

code P2127 on a 2010 Chevy Impala cause a/c not to kick on? Also where would I start to fix the problems with the code, easiest and cheapest? Code P2127 throttle/pedal position sensor/switch E circuit

...P2127 code means that the throttle or pedal position sensor switch E has a low input. The pedal position sensor is a sensor found on the gas pedal. The sensor tells the ECU when the gas pedal is ...