Questions & Answers for: Plymouth Voyager what does the codes mean

Question about 1996 Voyager

1 Answer

trouble codes I have trouble code #62 on 1996 plymouth voyager. I don't know what that means. Can you help and tell me what that means?. Does that code have to do with the transmission? Means 62 PCM ...

Ad

i did the turn the key three times trick and got a the codes that showed up was 12171155 i was wondering if i could get the diagnostics of the code. the vehicle is a 1998 plymouth voyager with the 3.0

Ad

Question about 1997 Voyager

1 Answer

...obd2 code reader to find out what set the code or codes.The readers are not expensive anymore and are worth looking into buying,they come with a book and a cd that will tell you what the codes

Question about 1995 Voyager

1 Answer

Codes 12, 21, 34 and 55 show up Code 21 is the oxygen sensor.. code 12 means the begining of the test. Disregard code 12. It just means you previously disconnected the battery. 55 is end of message. ...

Question about 1999 Voyager

2 Answers

What does it mean when the message "Service engine soon."? most cars have a "mileage/time clock" inbuilt into them to tell you when you need a service.handy really, if you forgot when your last ...

...codes mean from a flashing service engine light? By turning the switch on and off turn key as follows; off-on, off-on, off-on on is when the dash lights come on, and off is one click back from on. do ...

Question about 1994 Voyager

1 Answer

...codes mean. 12 means the system memory has been cleared recently.31 Evaporative emissions carbon vapor storage canister purge solenoid open or shorted. Check the under hood emission ...

...codes would tell me that you have transmission problems. this may mean internal trans failure and a rebuild or replacement transmission is needed or shift pack needs replacing. anyhow i would have a ...

Why does my 1997 Plymouth Voyager shut down while driving after 20 mins? While driving for about 20 mins it shuts down then starts up again. Replaced alternator,battery,output censor,speed censor and ...

...last 50-100 starts, so controller memory has been cleared. Code 55 is "end of message"- no further codes. Looks like you have no trouble

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...